Gold Country Viper 130-Grain Ultra-Low-Drag Soft-Point Rebated-Boat-Tail .284 Bullets — 50 Count

Description

Choose the ULD Viper when the base geometry is part of the goal

A 130-grain 7mm project may aim for lighter recoil, useful velocity or a flatter trajectory, but the buyer still needs a specific bullet to develop around. The distinction here is physical: this is the Viper soft point with a rebated boat tail.

This Viper combines an exposed lead-tip soft point, ultra-low-drag spitzer form and rebated boat tail. Viper is Gold Country’s lead-tip soft-point family. ULD means Ultra Low Drag. The rebated boat tail separates this component from the 130-grain Viper LD flat base.

This listing contains 50 component bullets. Cases, primers, powder and loaded ammunition are not included. Gold Country hand swages these bullets in small batches. They are made to order and normally ship within seven business days.

What this bullet helps you accomplish

It gives you a precisely identified starting point for developing a lighter 130-grain .284 hunting load around Viper soft-point construction and ULD rebated-boat-tail geometry. You can establish seating, fit and safe loading parameters around the actual bullet, then test whether the complete system meets the accuracy, trajectory and field requirements behind the project.

Why this page exists beside the other 130-grain choices

Choose this Viper ULD when the project calls for an exposed lead-tip soft point and rebated boat tail. Choose the Viper LD when the same family identity with a flat base is the better starting point. Choose the Scorpion LD when the assignment calls for Gold Country’s hollow/open-tip construction.

Component specifications

• Manufacturer: Gold Country Ammo
• Family: Viper
• Diameter: .284 inch / 7mm
• Weight: 130 grains
• Nose: Ultra-low-drag exposed lead-tip soft-point spitzer
• Base: Rebated boat tail
• Construction: Copper jacket and lead core
• Quantity: 50 component bullets
• Production: Hand swaged, made to order; normally ships within seven business days
• Made in: USA

Confirm fit and prove the load

This pointed bullet is not intended for conventional tubular magazines in which a bullet tip rests against the primer ahead of it. Soft-point, ULD and base-form terms identify construction and design intent. They do not establish a universal ballistic coefficient or guarantee accuracy, stability or terminal results. Confirm bullet length, seating depth, cartridge overall length, chamber and magazine fit, and barrel-twist suitability. Begin with current published jacketed-bullet data for the exact cartridge and weight, work carefully, and test the finished load in the actual rifle.

Continue with the Gold Country Viper Bullet System and 7mm Rifle & Bullet Compendium.

No profile found for this bullet.