This Technical Note identifies the most common wear locations in the Model 1895 and explains how to evaluate them during routine inspection.
I. Wear as a Diagnostic Signal
Wear in the Model 1895 is progressive and predictable.
- Most wear is gradual and non-catastrophic
- Patterns reveal load history and use discipline
- Early recognition prevents irreversible damage
II. Bolt Face Wear
Bolt face wear reflects pressure, headspace behavior, and firing pin alignment.
Common indicators include:
- Primer flow marks
- Uneven case head contact
- Firing pin hole peening
Progressive bolt face wear often precedes headspace change.
III. Locking Surface Wear
Locking surfaces absorb the majority of firing load.
Wear appears as:
- Edge rounding or peening
- Shiny compression zones
- Changes in lever closing feel
(See TN-02 — Locking Lug Design & Wear Indicators)
IV. Magazine Interface Wear
The magazine system wears through interaction.
- Follower contact surfaces polish unevenly
- Feed lips show edge erosion
- Spring fatigue alters presentation timing
These issues often appear intermittently at first.
V. Inspection Discipline
Effective inspection focuses on:
- Consistency of wear patterns
- Rate of change over time
- Correlation with accuracy or feeding symptoms
Isolated marks matter less than trends.
Technical Scope — TN-11 (Common Wear Patterns & Inspection Points)
Primary Focus: Bolt face wear indicators, locking surface deformation, magazine interface wear, inspection methodology, and interpretation of normal versus concerning wear in the Model 1895 rifle platform.
Referenced By:
WARNING: